10 Way 19″ 2U Power Metered 16A IEC 60320 C13 Individually Fused Automatic Transfer Switch 2x IEC 60320 C20 Inlet PDU

Part No. ATS/F/16/PM

• The Olson Electronics Automatic Transfer Switch has two mains supplies that provide redundant power to connected equipment
• It is designed to normally supply power from the primary supply ‘A’. If that primary supply becomes unavailable for any reason, it will automatically switch to the secondary supply ‘B’, with no interruption to the connected equipment
• Once the primary supply ‘A’ is available again it will automatically switch back, again without interruption to the equipment
• PLEASE NOTE that the primary supply ‘A’ and the secondary supply ‘B’ must both be connected to the same phase
• 2x C20 16A inlets
• 10x C13 10A individually fused unswitched sockets
• Fused at 3.15A as standard. Alternative rated fuses can be supplied 1A to 10A max (20 x 5 mm fuses)
• Incorporating the Olson Deluxe Digital Power Meter
• A robust mild steel construction with black paint finish
• 19″ horizontal rack mounting 2U (88.8mm) high
• High-Integrity dual earthing and external M5 earth stud with 250mm long earth lead for maximum safety
• 16A max. rated. 220 – 240VAC 50Hz
• 25A rated DPDT relay
• Switching time max 15mS (‘A’ -> ‘B’ and ‘B’ -> ‘A’)
• Pull in voltage 184VAC (‘A’ selected)
• Drop out voltage 92VAC (‘A’ -> ‘B’)
• Electrical life at 16A – 18 x 103
• Mechanical life – 10 x 106
• A digital meter with easy to read 9.4mm high digits

The Deluxe Power Meter Features:
• Monitor Amps, volts, watts and P.F. (all True RMS)
• The ability to either automatically scroll through the four values or to select the parameter to be displayed
• 4x LEDs to easily identify what parameter is being measured
• Accuracy 1% amps, volts, 2% Watts, 3% P.F.